RSBT30C3 Double Shear Beam Load Cells

• C3 precision class
• Executed in nickel-plated steel with laser solderings
• High precision and linearity also with non perpendicular loads
• Optimised for parallel connection
• IP68 protection 
• Capacity: 30000kg
• Shielded teflon connection cable
• Test certificate available upon request 

• Minimum verification interval: Vmin = EMax / 10.000;

• Maximum number of load cell divisions: nLC=3000 (C3);

• Full Scale Output: 2mV/V +/- 0,2%;

• Temperature effect on full scale output: 0,0014%FS/°C;

• Tempeature effect on the zero: +/- 0,0017%FS/°C;

• Compensated temperature range: -10°C/+40°C;

• Operating temperature range: -35°C/+65°C;

• Creep error after 30 minutes: 0,02% F.S;

• Excitation voltage: from 5 to 18 VDC;

• Input Resistance: 750 Ohm;

• Output Resistance: 700 ± 7 Ohm;

• Zero Balance: +/-1,5% F.S.;

• Insulation resistance > 5000 MOhm;

• Safe overload > 150% F.S.;

• Maximum overload 300% F.S.;

• 4-wire shielded cable, 15m long, 6mm diameter.

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:

• ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
• ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65

The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).

IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.