DSBI10 Stainless Steel Double Shear Beam Load Cells
Stainless steel double shear beam load cells suitable for building, for example, CE-M approved scales for high capacities or for weighing tanks and hoppers with the relevant accessories.The load cells also provide a high level of accuracy with the expansion of the weighing structures.
£365.00 £438.00
- C4 precision class
- 17-4 PH stainless steel construction
- IP68 protection
- Capacity: 10000kg
- Shielded connection cable
- Test certificate available upon request
- Minimum load cell verification interval: Vmin = EMax / 10.000
- Combined error 0,03% of Full Scale Output (F.S.)
- Full Scale Output: 2mV/V +/- 0,1%
- Temperature effect on zero: 0,00116% /°C
- Temperature effect on full scale output: 0,00097% /°C
- Compensated Temperature Range: -10°C/+40°C
- Operating Temperature Range: -30°C/+85°C
- Creep error after 30 minutes: <0,02% F.S.
- Maximum tolerated excitation voltage: 15 VDC
- Input Resistance: 700 ± 7 Ohm
- Output Resistance: 700 ± 7 Ohm
- Zero Balance: +/- 1% F.S.
- Insulation Resistance: >5000 MOhm
- Safe Overload: 150% F.S.
- Ultimate Overload: 300% F.S.
- 6-wire shielded cable, 15m long, 5mm diameter
The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
- ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
- ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65
The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.
| Class | C4 |
|---|---|
| Max (kg) | 10t |
| ATEX Option | Optional |
| Cable Length | 15m |
| IP Rating | IP68 |
Write Your Own Review
