SBT2500-1KL Shear Beam Nickel-Plated Load Cells
Nickel-plated approved load cells, with low-power 1000 Ohm output resistance for mobile battery applications. The measures are compatible with the main shear beam load cells present on the market. They are suitable for creating CE-M approved scales with 4 load cells or for weighing conveyors, tanks and hoppers.
£90.00 £108.00
- C3 precision class
- Nickel-plated construction
- Potted seal, IP67 protection
- Max. capacity: 2500kg
- Shielded connection cable
- Test certificates available upon request
- Minimum load cell verification interval Vmin = EMax / 10.000
- Maximum number of verification intervals nLC = 3000
- Combined error 0,017% of Full Scale Output (F.S.)
- Nonlinearity ± 0.02% FS
- Hysteresis ± 0.02% FS
- Repeatability ± 0.01% FS
- Full Scale Output 2mV/V ± 0.5%
- Zero balance ± 1% FS
- Compensated Temperature Range -10°C/+50°C.
- Operating Temperature Range -20°C/+60°C.
- Creep error after 30 minutes <0,02% F.S.
- Maximum tolerated excitation voltage 15 Vdc
- Input Resistance 1085 ± 10 Ohm
- Output Resistance 1000 ± 5 Ohm
- Insulation Resistance >5000 MOhm
- Safe Overload 120% F.S.
- Ultimate Overload 300% F.S.
- 6-wire shielded cable, 3,5m long, 5 mm diameter
| Cable Length | 3.5m |
|---|---|
| IP Rating | IP67 |
Write Your Own Review
