SPSW Series Single Point Stainless Steel Load Cells

• C3 precision class
• Off center load compensated
• Made in 17-4 PH stainless steel
• IP67 protection
• Max. capacities: from 7.5 to 200 kg
• For platforms with dimensions up to 500 x 400 mm
• Shielded connection cable
• Test certificates available upon request

• Minimum load cell verification interval: Vmin = EMax / 10.000-15.000

• Maximum number of verification intervals: nLC = 3000

• Full Scale Output: 2mV/V +/- 10%

• Temperature effect on zero:

   

  • from ±0,0093% F.S./10K to ±0,0140% F.S./10K

• Temperature effect on full scale output:

   

  • ±0,0117% F.S./10K (-10°C/+20°C)

  • ±0,0175% F.S./10K (+20°C/+40°C)

• Compensated Temperature Range: -10°C/+40°C

• Operating Temperature Range: -10°C/+50°C

• Creep at nominal load in 30 minutes: ± 0,01% F.S.

• Maximum tolerated excitation voltage: 15 VDC

• Input Resistance: 380 ± 15 Ohm

• Output Resistance: 359 ± 5 Ohm

• Insulation Resistance at 100V: >1000 MOhm

• Safe Overload: 150% F.S.

• Ultimate Overload: 300% F.S.

• Nominal displacement: < 0.5 mm

• 6-wire shielded cable, 3m long, 5mm diameter

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:

• ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
• ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.

The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).

IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.