SPSZ1000 Single Point Stainless Steel Load Cell
Stainless steel load cells for off centre loads, suitable for building CE-M approved scales with a single load cell with maximum dimensions of 800 x 800 mm.
- C3 precision class
- Off centre load compensated
- Made in 17-4 PH stainless steel
- IP68 / IP69K protection
- Max. capacity: 1000kg
- For platforms with dimensions up to 800 X 800 mm
- Shielded connection cable
- Test certificate available upon request
- Minimum load cell verification interval:
- Vmin = EMax / 7.500-12.500
- Maximum number of verification intervals: nLC = 3000
- Full Scale Output: 2mV/V +/- 10%
- Temperature effect on zero:
- from ±0,0112% F.S./10K to ±0,0186% F.S/10K
- Temperature effect on full scale output:
- ±0,0117% F.S./10K (-10°C/+20°C)
- ±0,0170% F.S./10K (+20°C/+40°C)
- Compensated Temperature Range: -10°C/+40°C
- Operating Temperature Range: -10°C/+50°C
- Creep at nominal load in 30 minutes: ± 0,01% F.S.
- Maximum tolerated excitation voltage: 15 VDC
- Input Resistance: 380 ± 15 Ohm
- Output Resistance: 300...500 Ohm
- Insulation Resistance (100V) >2000 MOhm
- Safe Overload: 150 % F.S.
- Ultimate Overload: 300% F.S.
- Nominal displacement: < 0.5 mm
- 6-wire shielded cable, 3m long, 5mm diameter
| Cable Length | 3m |
|---|---|
| IP Rating | IP69K |
Write Your Own Review
