RSBT Double Shear Beam Load Cells
Double shear beam load cells particularly suitable for weighing weigh bridges, dosage systems, tanks, silos, etc., complete with support and oscillating spherical joint. CE-M approved.
Starting at £230.00 £276.00
- C3 precision class
- Executed in nickel-plated steel with laser solderings
- High precision and linearity also with non perpendicular loads
- Optimised for parallel connection
- IP68 protection
- Capacities: 25t to 40t
- Shielded teflon connection cable
- Test certificate available upon request
- Minimum load cell verification interval: Vmin = EMax / 15.000
- Maximum number of verification intervals: nLC = 6000
- Combined error: 0,008% of Full Scale Output (F.S.)
- Full Scale Output: 2 mV/V ± 0,1 %
- Temperature effect on zero: 0,0009% /°C
- Temperature effect on full scale output: 0,0007% /°C
- Compensated Temperature Range: -10°C/+40°C
- Operating Temperature Range: -20°C/+60°C
- Creep error after 30 minutes: 0,012% F.S.
- Maximum tolerated excitation voltage: 15 VDC
- Input Resistance: 385 ± 20 Ohm
- Output Resistance: 350 ± 5 Ohm
- Insulation Resistance: >5000 MOhm
- Safe Overload: 150% F.S.
- Ultimate Overload: 200% F.S.
- 6-wire shielded cable, 5m long, 5mm diameter.
The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:
- ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
- ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65
The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).
IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.
| Class | GP |
|---|---|
| Max (kg) | 40t |
| ATEX Option | Optional |
| Cable Length | 15m |
| IP Rating | IP68 |
Write Your Own Review
