SPSX300 Single Point Stainless Steel Load Cell

• C3 precision class
• Off centre load compensated
• Made in 17-4 PH stainless steel
• IP67 protection
• Max. capacity: 300kg
• For platforms with dimensions up to 600 X 800 mm
• Shielded connection cable
• Test certificate available upon request

• Minimum load cell verification interval: Vmin = EMax / 10.000-15.000
• Maximum number of verification intervals: nLC = 3000
• Full Scale Output: 2mV/V +/- 10%
• Temperature effect on zero:
  
  • from ±0,0093% F.S./10K to ±0,0140% F.S./10K
• Temperature effect on full scale output:
  
  • ±0,0117% F.S./10K (-10°C/+20°C)
  • ±0,0170% F.S./10K (+20°C/+40°C)
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -10°C/+50°C
• Maximum tolerated excitation voltage: 15 VDC
• Input Resistance: 390 ± 15 Ohm
• Output Resistance: 359 ± 10 Ohm
• Insulation Resistance (100V) >2000 MOhm
• Safe Overload: 150% F.S.
• Ultimate Overload: 300% F.S.
• Nominal displacement: < 0.5 mm
• 6-wire shielded cable, 3m long, 5mm diameter

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:

• ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga
• ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65.

The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).

IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.